absoluteBLACK GRAPHENlube® kædeolie - 140 ml - GRLUBE140

Verdens bedste kædesmøremiddel, punktum!

absoluteBLACK har brugt 2 år på at udvikle denne voks med det nye "vidundermiddel" grafen. Det har resulteret i et smøremiddel som holder utroligt længe, og som kun mister max. 5 watt friktion fra kæden ved 900 km kørsel.
absoluteBLACK udtaler: "GRAPHENlube® giver ingen ekstra watt, men reducer watt-tabet"

Fordele:

• Able to hold sub 5 Watts of frictional loss over 900km on a Single application (in dry, low dust road conditions. After immersive lubing).
• It gives you “free” power regardless the conditions.
• Extends life of your drivetrain, hence saving on replacement costs.
• Repels water and does not attract dirt.
• Dry, paste like coating that can stay on the chain over 1800km (in dry, low dust road conditions. After immersive lubing). 
• Unique black look of the lubricant when dry.
• Safe: Does not contain any harmful solvents.

Indeholder 140 ml

For at få det fulde udbytte følg nedenstående anvisninger:

FIRST APPLICATION: Take the chain off the bike or use brand new chain and clean it using a solvent (like White Spirit or mineral turps) by immersing the chain completely in the solvent for 20-60min using the poly bag that was delivered with the large lube bottle (Use gloves). Shake the bag with chain for 1min at the end. Take chain out and let it fully dry (2-12h). Fully immerse the chain in the lube (use second poly bag) for about 2-10 min. You will need to pour at min 30ml of the lube to the bag, ideally 50ml or more (you will recycle the rest back to the bottle). You should gently shake and articulate the links through the bag. Remove the chain, hang it in place with good airflow, not touching anything and let it dry completely (Ideally overnight). With this initial procedure you will use up about 10-15ml of lube - rest you will pour back to the bottle to be reused.

HOW TO LUBRICATE YOUR CHAIN AFTER FIRST APPLICATION:

• Wipe the chain with a cloth. (Use gloves)
• Shake the bottle. Apply the lube continuously to the inside of a chain turning cranks backwards (simple dripping procedure). 
• Let the lube dry for a min. of 2h before riding, ideally overnight.

*For absolute maximum Racing performance where every watt counts, re-lube (by dripping) every 600km or sooner in dry conditions and after every wet ride. If you race, apply a day before the race.
*For everyday riding you can re-lube (by dripping) between 900-1200km in dry road conditions and after 3-4 rides in wet conditions or when you hear chain becomes dry.
*Always apply to a dry chain.